Search
Register
Only Admins can see this message.
Data Transition still in progress. Some functionality may be limited until the process is complete.
Processing Attachment, Gallery - 186.17954%

8 or 10 lugs on a snare? Last viewed: 14 hours ago

Posts: 1132 Threads: 43

From larryvonludwig

Very good points. I'm learning alot here. I happen to be changing strainers ( from a sonor to a geo way) on a frankenstien snare. It appears to be a leedy chromed brass shell and has hayman(?) lugs. 8 lugs for top,6 for bottom, a mix of double and single lugs. I think the guy who did this (muzzy at las vegas shop) was going for looks. Anyone ever see a snare done this way? larry

Slingerland 2-for-1's are all I've seen like that, but they were all single-sided lugs. Post a pic, sounds like a cool drum!

I'm no guru, just a vintage drum junkie!

Psalm 150:5
1945 Slingerland RK sparkling gold pearl 26/13/14/16/early 50s 5.5x14 Krupa RK
1967 Slingerland green glass glitter 20/12/14/Hollywood Ace
60s Slingerland 24/13/16/7x14 project
24/13/16/7x14 project RKs
60s 5 & 6.5 Sound Kings
1942 7x14 WMP Krupa RK
1930s Slingerland Universal
1967 Ludwig Hollywood sparkling blue pearl 22/12/13/16
1967 Ludwig Supraphonic 400 & 402
1965 Ludwig Jazz Fest sparkling blue pearl
1923 Ludwig 5x14 NOB
Posted on 13 years ago
#11
Posts: 6583 Threads: 644

Most people I know prefer a 8 over 10 lug snare..

I don't even think that Leedy >(Indiana) even made a 10 lug!

Thats the cool thing about them when you find them...

"Always make sure your front bottom BD lugs clear the ground!"
Posted on 13 years ago
#12
Posts: 216 Threads: 46

From tubelugs

Assuming you mean "affect my number of lugs", the answer is yes, you will want the number of lugs to be an even multiple of the number of staves. That's so each lug sits in the same place on a stave, instead of having one lug in the middle of a stave, the next lug on a seam, etc. So with 30 staves you're probably looking at 10 lugs.

tubelugs - yes i did mean "affect my number of lugs" DOH

luckily, my man hasn't machined my wood yet, so i've jiggled my calculations about, not an easy task for a drummer! :p, and will make it with 24 staves instead of 30. and the fact that i went and bought a set of 8 double ended yamaha lugs, made it all the more luckier Yes Sir

again, thanks for all your replys, fingers crossed this one will work.

i'll keep you posted

Drums are loud....So play them LOUD!!!
Posted on 13 years ago
#13
Posts: 266 Threads: 42

From SlingerLynn

Slingerland 2-for-1's are all I've seen like that, but they were all single-sided lugs. Post a pic, sounds like a cool drum!

Here it is. I believe it's a leedy 2-piece shell, hayman lugs and I put on a geo way strainer, in place of a sonor. It's got a few extra holes, but she's ok.

larry

1 attachment
hayman 005.JPG
109.3 kB
Posted on 13 years ago
#14
Posts: 10714 Threads: 579

I prefer 8 and 10 lug drums, I'm not a six lug fan. For vintage wooden drums I like 8 lug the most. for vintage metal drums it depends on the drum but once again 8 or 10 lug models. I built a 10 lug wooden snare drum out of a keller vintage mahogany shell. If I build again. I'm going with an 8 lug model this time with a 30 degree round over bearing edge using a vaughncraft solid maple shell.

Your drummers not much good is he!? What you need is someone that's as good as me. ! John Henry Bonham !!
Posted on 13 years ago
#15
Posts: 216 Threads: 46

yes, i've decided on 8 lugs, and was always going for a 30 degree bearing edge.

one question - does the thickness of the shell have any effect on the bearing edge degree? eg; will 30 degrees work on a 20mm thick shell.

hope you all don't miknd my asking all these questions. i'm still wet behind the ears after all. Bowing

Drums are loud....So play them LOUD!!!
Posted on 13 years ago
#16
  • Share
  • Report
Action Another action
Something else here