I just bought a threesome of 1969 & 1970 Ludwig mahogany finish 3-ply toms to add to my existing set. These are to mix and match with my existing set. Some of the bolts holding the lugs onto the drum shells are a little corroded inside the drums. My questions:1) Does anyone have experience with replacing all those little bolts and washers that hold the lugs to the shells?2) Is "Liquid Gold" good protection for both inside and outside drum shell finishes? Or maybe guitar polish better?3) If there is a small crack down into the shell reinforcing ring, might it glue and clamp back tight, or just leave it alone?4) There is a light, wide rub mark on the 16x18 tom finish. Is this easy to overspray and blend? 5) On these 1969 & 1970 toms what was used for the clear coat finish?Thank you!, Craig
If by corroded you mean badly rusted, then don't worry.. Mineral water with white vinegar will remove all that rust. You just have to soak overnight or maybe a day or two to be on the safe side.. If they're corroded like metal is deteriorating, then you can find same size bolts at the hardware store. I had to replace some when i restored my vintage Ludwig Rocker kit with classic lugs and they fit fine.. Just bring one with you to the hardware store just so you or a store employee can measure it properly..
