Depending n how dirty they are, I might clean them all off with a damp cloth and enjoy. Probably no need to disassemble them. Yes Rogers supplied the bass drums with a felt strip on both bass heads.
A Real Rogers Christmas Story! Last viewed: 0 seconds ago
That's a much better ending to that story. Not to be crass or heartless, but since the previous owner simply *chose* to leave the drums in the boxes all these years, I'd say the sympathy shifts to the kit itself...
...so you need to *play* those fantastic puppies! :)
Mitch
Can't see a need to tape off the lugs. That would just add residue to the lugs.
I would pull the rims/tension rods and use Windex sprayed to the micro-fibre towel (not the shell). Wipe down until smooth. Heads could be left on. Same on wax. Change MF towels often. Get the TR's and rims clean and waxed. Put it all back in one piece and good for another 50yrs.
A pain to clean under in place tension rods, hoops tend to get starts of trouble on the underside first. Outstanding one of one kit. Cool you are going slow on the path to take.
Creighton
Fellow Members,Soap BoxAs stated in the OP regarding the "Time Machine" Rogers kit that was on eBay that didn't sell. I was the person who was contacted by the seller first and acquired them. First, I'm going to call these "Factory Original", as I'm not even sure that term has been used in the Vintage Drum Collecting Community! After getting these home from a long trip(6 hours to Ohio to pick them up, then 5 hours to visit my parents, then 6 more hours home today!), I've unpacked them and mocked them up. I did this to unbox them, check over each box and it's contents, and see if there were any missing parts. The only missing item(s) are (4) set screws(BTW-If anyone has 4 to spare, please PM me-Thx), and of the two sets of sticks, only one "Buddy Rich" drum stick.It was an amazing feeling taking these out of the boxes and setting them up. I worked slowly, as a feeling came over me. I felt as if I was being watched, but it was a pleasant kind of thing. I noticed that I had broke a light sweat and stopped to wipe my brow when the Christmas clock chimed the top of the hour and played a short verse of "Silent Night"! I sat back and looked at what was splayed out in front of me and took a deep breath and looked up toward the heavens and thanked him for his service to our country. After all, he served our country nearly 46 years ago during wartime. It was truly a step back to Christmas 1966! WOW!Which leads me to the history of these drums;These drums were bought by the parents of the recipient, the son, who was given these drums for Christmas, 1966. His name is written in pen on the hardware box(I will withhold for privacy), and the last name is on one of the other boxes. Incredibly, there is still a small piece of the white and gold wrapping paper on the pedal box, and inside the floor tom box. Some 1-1/2 years later, he left for the service and went on to Vietnam where he served and came back to be a postal worker for 28 years. Sadly, he passed away this past July at the age of 64 in Troy, Ohio. The Original boxes are quite special, as they show that they had been delivered(not shipped due to proximity) to Thompson & Etter Music directly from the Rogers Dayton plant. Each drum box is date stamped:5x14 Powertone Snare drum - Sept. 6, 19668x12 Tom - Aug. 31, 196616x16 Floor Tom - Sept. 9, 196614x20 Bass Drum - Aug. 31, 1966There is no date stamp on either the Accessories box, the cymbal boxes, or the pedal box.While unpacking Christmas decorations this season(there is even a piece of tinsel in one of the boxes), the Mother, or perhaps wife of the owner, decided to take these to the local music store and see if they were interested in purchasing them. The music stored purchased them and immediately called a friend who played in a 50's band to see if he was were interested. He and his brother scraped up the money and purchased them seeing what they were and immediately listed them on eBay, which is where I first saw them. The listing ended without a single bid. I happened to be the first member to contact him if they didn't sell to discuss closing a deal. We settled on a very agreeable price, and I drove to Ohio to get them!So there we have it! It's just such an incredible find I am so honored to have them in my collection!Now that they are home, I want to pose a few questions:What would you do with them? Clean them up & put new heads on them? The chrome could use it, even the swan leg HH and snare stand.Play them? Leave them just as they are?(That's where I am at)Take off the original heads so they can be played?I'm really torn here. It's not my typical find where I clean it up, put new heads on, etc. This is truly "Factory Original" in every sense of the word! All of the head logo's line up with the script logo on the shells. Top and bottom heads. Obviously, that's how they were assembled in Dayton. Could the heads being on this long deteriorate the shell? Or the head crack itself in time?Any advice here is appreciated.I plan to do a photo session of these and put them back into the boxes, and put them away eventually.Thanks for reading my long post.
Fantastic story ! Really heart warming.. It's the stuff Christmas dreams are made of. The way you told it makes me feel as if i was there witnessing the whole thing.. Congratulations ! Peace and God bless ;)
Rarely do I read long descriptions...but this one is an exception! A great story and glad to see the drums go to someone who truly appreciates the Rogers marque and will not piece these drums out for profit.
My 66-67 Headliner kit also has original heads. I'm a very light player and don't play the kit often. I've chosen to leave the heads on the kit. As others have said, if you are a hard player, or even if you decide to play the kit more, change out the batter heads with Remo coated Ambassadors, and you'll get the same wonderful 60's tone that the drums were built for.
Congrats on your purchase!
-Mark
I really appreciate all the feedback.
I think I'll go ahead and clean them in place with the Windex and wax, taking off the heads. I have gotten drums before where the rims had begun to rust on the underside.
I would like to play them a little, to hear them sing again. I have kits for gigging, so these would stay in the Dr room.
So, one at a time. Off I go.Cool1
1965 Ludwig Clubdate Oyster Blue
1966 Ludwig Clubdate Oyster Black
1969 Ludwig BB Blue Oyster Keystone Clubdate
1971 Ludwig BB Black Oyster
Early 60's Camco Oaklawns Champagne Sparkle
Reading the story, I held my breath expecting to hear that something terrible had happened to the original owner overseas that prevented him from playing these drums, but it sounds like he got a really nice drumset and then just never used it much.
I hope he wasn't injured or something.
Good that they were well preserved!
-Erik
______
Early '70's Slingerland New Rock #50 in blue agate (20-16-13-12)
Late '50's WFL Swingster/Barrett Deems in black/gold Duco
'70's Slingerland Gene Krupa Sound King COB
early '70's Ludwig Acrolite
'80's Ludwig Rocker II 6 1/2" snare
Rogers Supreme Big "R" hi hat
I too would clean them but not dissassemble them. I wouldn't use windex...it leaves a residue that can cloud the wrap.
I'd re-head.....giving you a chance to look more closely for corrosion on the insides of hoops...... clean and wax them
Lightly lube the t-rods
Novus 1 on the shells....works just fine on lugs and other hardware too
Store the original heads carefully
Play the snot out of them.....at home, damn the neighbors......:)
Oops. Damp Micro-fibre towel with warm water after the Windex and then dry and wax.
Creighton
- Share
- Report